The ANALYTICAL FLOW TECHNOLOGIES LLC DENSITRAK® SVT Density Meter offers a multitude of design features which greatly benefit the customer while also maintaining an affordable price.

Benefits Features Applications
  • Small, compact design with a variety of flange configurations
  • Free draining/lower pressure drop
  • Safe design integrity
  • Temperature compensated density
  • Detects small density changes
  • No radioactive source
  • Quick connect can be installed or moved easily
  • Suitable for narrow range applications
  • Made & Assembled in the USA
  • Small, compact design
  • No moving parts
  • Dynamic calibration
  • Outer shell pressure rated above operating pressure
  • Integral RTD's
  • High resolution
  • Non-nuclear
  • RoHS Compliant
  • Water & Wastewater Treatment
  • Fluid Product Blending & Interface Detection
  • Pulp & Paper Manufacturing
  • Chemical Processing
  • Power Generation
  • and many more
Analytical Flow Technologies LLC DENSITRAK® SVT Density Meter Product Specifications Chart
Density Operating Range 0.50 – 3.00 grams/cubic centimeter [gr/cm³]
Maximum Density Span 0.70 gr/cm³ (range can be extended with reduction in accuracy)
Density Resolution 0.0001 gr/cm³
Meter Accuracy 0.0001 gr/cm³
Repeatability Better than 0.01%
Operating Temperature Standard: 50°F to 140°F [10°C - 60°C]
Optional: 32°F to 203°F [0°C - 95°C]
MAX Temp. Differential ΔTmax = 90°F [50°C]
Operating Pressure Range: 0 to 2,220 PSI [0 – 153 bar]
Hydrostatic Test: 1.5 times line pressure
Flow Rate MIN: .25 Gallons per Minute (GPM)
Frequency Signal Output Nominal 0.30 kHz to 3.0 kHz
Temperature Sensor 100Ω Pt RTD (α = .00385)
Power Requirement VOLTAGE: 18 – 32 VDC
CURRENT: 30 – 50 mA nom.
Materials of Construction Standard Wetted Parts:
  • 316/316L Stainless Steel
Non-Wetted Parts: 304 Stainless Steel
Electrical Classification Standard Explosion-Proof Class I, Division 1, Group D
Housing Approved: CSA, FM, EExd, UL
Physical Dimensions 24" x 12" x 6"
Shipping Weight: Approx. 40 pounds
* Based upon the density meter's raw frequency output. Field accuracy of the density reading ultimately depends upon the collective effects (RMS) of all measurement standards of density, temperature, pressure input during calibration, operational data collection and processing.